北京塞车pk10官网计划

Jinhe Ultrasonic Vibrating Screen Manufacturer Main Products: Various Vibrating Screening Machines, Vibrating Platforms, Lifting Conveying Equipment and Accessories
Shaker manufacturer service hotline
0373-3381685

Ultrasonic vibrating screen external displacement energy device

【product description】
Ultrasonic vibrating screen is called "adherent electrostatic nemesis". It has high value-added powders that cannot be accurately and quickly sieved by ordinary rotary vibrating screens with static electricity, easy agglomeration, floating, and adhesion between 300-600 mesh. Excellent screening performance. But in fact, the basic screen of an ultrasonic vibrating screen
Order hotline: 0373-3381685
Product introduction

无法精确快速筛分的高附加值粉体有着卓越的筛分表现。 Ultrasonic vibrating screen is called "adherent electrostatic nemesis". It has high value-added powders that cannot be accurately and quickly sieved by ordinary rotary vibrating screens with static electricity, easy agglomeration, floating, and adhesion between 300-600 mesh. Excellent screening performance. But in fact, the basic sieving principle of the ultrasonic vibration sieve is the same as that of the rotary sieve. It is a sieving equipment modified with the rotary sieve as the main body. The key reason that causes the difference between the two sieving effects is so big is the ultrasonic. Existence of displacement energy displacer outside the vibrating screen.

简介 GTS30 Ultrasonic Screening System

The ultrasonic vibration control system, also referred to as the ultrasonic vibrating screen external energy exchange, is called GTS30 ultrasonic sieving system, which can convert ordinary electrical energy into 18KHz mechanical vibration, which makes the vibration frequency of the vibration screen increase from 1460 times per second to 36,000 times, it is this low-amplitude, high-frequency ultrasonic vibration wave (mechanical wave) that makes the ultrasonic vibration sieve stand out from the ordinary light screening equipment and become the favorite high-efficiency screening equipment for ultra-fine segment customers.

超声波振动筛外置换能器图片

GTS30 Ultrasonic Screening System (External Ultrasonic Vibrating Screen Replacement Energy Device) is a simple, practical and reliable screening system, which is the most effective solution to the current mesh clogging. It can be widely used in pharmaceutical, metallurgy, chemical, mineral processing, food and other industries that require fine screening and filtration. It has the characteristics of high screening and filtering accuracy and no clogging of the mesh. The problem of screening such as holes is a major technological breakthrough in the domestic screening industry.

优势 Jinhe GTS30 Ultrasonic Screening System

First, the on-site operation is simpler and more convenient.

Second, the output power is large, a single unit can drive two meters of mesh.

Third, high versatility, suitable for any external grid, can be driven.

4. Ultrasonic vibrating screen and transducer can work normally in the environment of -40 ℃ ~ 60 ℃.

Fifth, the temperature of the replacement transducer outside the ultrasonic vibrating screen works at about 40 ° C at normal temperature, which avoids the problem that the transducer is often burnt out.

6. The aviation plug-in adopts a new design structure, which prevents outside dust from entering and causing the transducer to be short-circuited and burned out.

7. The waveform has no burrs, which reduces the damage caused by the burrs caused by the waveforms of similar products to the screen and prolongs the service life of the screen.

8. Compared with similar products, the output is increased by 20% to 40%

Nine, there is a power outage caused by external factors, the incoming call does not need to operate again, you can work normally in the original setting mode.

X. GTS30-200 has strong ultrasonic stability, which reduces the instability of the ultrasonic shape caused by unstable voltage or other factors, which reduces the working efficiency of the ultrasonic vibrating screen and damages the screen.

Eleven, soft start, flexible start at startup, avoiding the impact of the sudden start on the screen.

Twelve. The core components of the main engine are imported components, which enhances the working performance, reduces the failure rate and prolongs the service life of the equipment.

Thirteen, the host and the transducer can work in humid and harsh environments, and meet IP65.

14. The external installation of the transducer has no effect on the materials and is easy to maintain.

TS Components of GTS30 Ultrasonic Screening System (External Ultrasonic Vibrating Screen Displacer)

1. Ultrasonic controller: 30KHz high-frequency ultrasonic generator. The built-in microcomputer chip can automatically track the entire digital frequency according to the different states of the ultrasound, without manual adjustment, and the operation is simple and convenient.

2. High-frequency connection line: The cable is connected between the ultrasonic oscillator and the ultrasonic controller.

3. Connector: aviation connector.

4. Converter: high frequency ultrasonic transducer.

5.Ultrasonic grid: It consists of outer grid and resonance ring.

6. Screen mesh: applicable to 10 mesh ~ 635 mesh.

超声波振动筛专用换能器超声波振动筛专用数据线超声波振动筛专用安装配件

原理 GTS30 Ultrasonic Screening System

GTS30 ultrasonic sieving system (external ultrasonic vibrating screen replacement energy device) consists of an ultrasonic controller, a converter, and a resonance ring. The high-frequency electrical oscillations produced by the ultrasonic controller are converted into longitudinal oscillating waves in the form of high-frequency sinusoids by the converter. These oscillation waves are transmitted to the resonance ring to cause the resonance ring to resonate, and then the resonance ring is evenly transmitted to the screen surface. The material on the screen is superimposed with ultrasonic vibration at the same time as the low-frequency three-dimensional vibration, which can prevent the blockage of the mesh and improve the output and quality of the screening machine.

说明 GTS30 Ultrasonic Screening System (External Ultrasonic Vibrating Screen Replacement Energy Device) Operation Instructions

1. Depending on the material being screened, the setting angle and direction of the eccentric hammer inside the ultrasonic vibrating screen are different, so it should be adjusted before the equipment is powered.

2. The ultrasonic controller and the ultrasonic rotary screen are powered separately, the ultrasonic power source is single-phase power, and the ultrasonic rotary screen is three-phase power (reliable grounding).

3. The leads of the ultrasonic controller and the converter are connected through a plug. Please insert the connector according to the marking of the ultrasonic controller cable and lock it so that the ultrasonic controller and the ultrasonic interface of the body are correctly connected.

4. There are two buttons of “Intensity / Stop” and “Continuous / Pulse” on the panel of the ultrasonic controller. In addition, there are LED windows to display the working status.

检查 GTS30 Ultrasonic Screening System (External Ultrasonic Vibrating Screen Replacement Energy Device) Installation Inspection

I. Installation steps of GTS30 Ultrasonic Screening System (External Ultrasonic Vibrating Screen Replacement Energy Device):

1. Before installing the ultrasonic vibrating screen, first check whether the parts are complete according to the packing list.

2. According to the installation diagram, install the replacement energy converter outside the ultrasonic vibrating screen. The foundation should have sufficient rigidity and strength to support the full static and dynamic loads of the vibrating screen. When installing, make sure that the ultrasonic vibrating screen is in a horizontal position.

3. Ensure that a minimum 75mm gap should be maintained between the ultrasonic vibrating screen and non-moving parts such as hoppers and chute.

4. The ultrasonic power source is AC110-220v, 50Hz. Check whether the AC220V power supply is normal.

5. The ultrasonic vibrating screen and the ultrasonic controller should be grounded reliably.

2. Debugging and trial operation of GTS30 ultrasonic screening system (external ultrasonic vibrating screen):

1. Check the power supply and all electrical connections to ensure correct and reliable, and run for 5 minutes with no load.

2. Adjust the angle of the upper and lower weights and the weight of the counterweight to make the running track of the mesh material meet the user's requirements. After adjustment, tighten the fastening bolts of the upper and lower weights.

3. Make sure that the ultrasonic controller is connected to the converter. Turn on the power of the ultrasonic controller and select the required vibration mode. Touch the net surface with your hand should have a clear vibration.
“了解详情,或者致电13938735717获取帮助。 The above is the introduction to the installation of this system. If it is not clear, you can click "" External Ultrasound System Installation Adjustment Video "for more details, or call 13938735717 for help.

自主研发经验,所生产的超声波振动筛完美解决了内置换能器清理、维护不便,换能器长久接触物料与随振动筛工作时的振动从而使寿命大大降低的缺点。 Jinhe Machinery has nearly 30 years of independent R & D experience in ultrasonic vibrating screens . The produced ultrasonic vibrating screens have perfectly solved the inconvenience of cleaning and maintenance of internal displacement transducers, and the transducers have been in contact with materials for a long period of time and the vibrations caused by the vibration screens have been used to increase the service life. Greatly reduced disadvantages. Adding an external support device and a quick card device can effectively ensure the stability of the external excuse of the transducer and ensure that the friction between the transducer connection line and the screen frame is minimized during the operation of the screen machine, thereby extending the ultrasonic vibration screen change. Energizer life.

超声波振动筛真机图

超声波振动筛厂房生产图

Contact shaker manufacturer
Xinxiang Jinhe Machinery Co., Ltd.
National Service Phone: 0373-3381685
Fax: 0373-3381285
QQ: 352293023
Company Address: Beihuan Physical and Chemical Industrial Park, Xinxiang City, Henan Province
Get the latest quote for shaker
* Contact
* Contact number
e-mail
QQ
* Product name
Purchase intention

建议您在“采购意向”一栏写入诸如:行业、使用目的、产量要求、材质要求等要求,方便技术人员为您推荐定制更为贴合您使用要求的高性价比超声波振动筛等振动筛分和输送设备。 [Warm Tips for Ultrasonic Vibrating Screen Manufacturers]: It is recommended that you write requirements such as: industry, purpose of use, output requirements, material requirements, etc. in the "purchasing intention" column, so that technical staff can recommend and customize the ones that are more in line with your requirements. Cost-effective vibration screening and conveying equipment such as ultrasonic vibration screens.
24h technical consultation hotline: 13937735717 (Xiao Gong)

Copyright © Xinxiang Jinhe Machinery Co., Ltd. All rights reserved. 粤 ICP 备 12006609 号 -4
National Service Phone: 0373-3381685 Fax: 0373-3381285
Company Address: Beihuan Physical and Chemical Industrial Park, Xinxiang City, Henan Province

Customer service
phone
service line:
0373-3381685
WeChat

WeChat public account